Characterization of Honey from Marigat in Baringo County, Kenya, based on their Physical Properties

Authors

  • M. Chepkemoi School of Engineering, University of Eldoret, P. O. Box 1125-30100 Eldoret, Kenya
  • J. Kollongei School of Engineering, University of Eldoret, P. O. Box 1125-30100 Eldoret, Kenya
  • D. Some School of Engineering, University of Eldoret, P. O. Box 1125-30100 Eldoret, Kenya

DOI:

https://doi.org/10.2200/aerj.v4i2.146

Keywords:

Characterization, Physical properties, Quality of Honey

Abstract

Marigat in Baringo County is among the Arid and Semi-arid Lands (ASAL) in Kenya where apiculture is the main source of income. Honey producers in the area keep their bees in the indigenous hives and natural colonies. Traditional methods are mainly used to harvest and process honey in the area. Honeycombs are crushed and mashed with bare hands to produce honey which is very unhygienic and not fit for human consumption. Honey produced by this method is of low quality hence sold in the local markets at a very low price. This contributes to high poverty levels and low living standards of honey producers residing in the area. However, this paper aims at characterizing honey based on its physical properties. These properties are significant in providing information regarding the quality of honey harvested from different locations of Marigat. This paper presents the physical properties of twelve (12) samples of honey collected from various locations of Marigat. The locations were Maoi Centre, Lopoi Junction, Marigat Town, and Koriema Centre. Honey samples from these locations were analysed based on their physical properties to determine the quality of honey produced in the area. The physical properties were moisture content, pH, relative density, and total water-insoluble solids content. Values of these parameters were compared with those of the set standards and requirements by the Kenya Bureau of Standards (KEBS) in Kisumu County. Results showed mean parameter values of moisture content, pH, relative density and total water-insoluble solids content of 18.05%, 3.9, 1.41 g/ml, and 0.22% m/m respectively. The range values of these parameters were 17.1% to 19.6%, 3.3 to 4.2, 1.4045 g/ml to 1.4343 g/ml, and 0.07% m/m to 0.61% m/m respectively. Moisture content and total water-insoluble solids content values of honey samples were within the maximum requirements of 22% and 0.5% m/m respectively as set by KEBS. However, results obtained from some locations for moisture content were not within the range of 14 to 18% as set by International Honey Commission (IHC) and Codex Alimentarius Commission (CAC). The total water-insoluble solids content of honey proved that honey was extracted by using the traditional method. The relative density of honey was slightly lower and higher than the set permitted limit of 1.42 g/ml, showing that moisture content in honey may be present in some locations. The pH values of honey were observed to be slightly higher and lower in some locations than the recommended value of 3.9. Hence, determining the quality of honey would ensure honey produced meets both local and international standards. This will attract higher profits and increased production rates. Hence, improving the standards of living of honey producers living in the area due to increased income from the sale of honey.

References

Abadariki, S. O., Fasan, J. O. and Akinnuli, B. O. (2013). Design, fabrication and performance evaluation of an indigenous honey extractor. Journal of Emerging Trends in Engineering and Applied Sciences, 4(1), 1-6.

Adebiyi, F. M., Akpan, I., Obiajunwa, E. I. and Olaniyi, H. B. (2004). Chemical/physical characterization of Nigerian honey. Pakistan journal of Nutrition, 3(5), 278-281.

Ahmed, J., Prabhu, S. T., Raghavan, G. S. and Ngadi, M. (2007). Physico-chemical, rheological, calorimetric and dielectric behavior of selected Indian honey. Journal of Food Engineering, 79(4), 1207-1213.

Akinnuli, B. O., Awopetu, O. O., Ikubanni, P. P. and Agboola, O. O. (2016). Development of Pedal Operated Honey Extractor. Current Journal of Applied Science and Technology, 1-10.

Aroucha, E. M., Silva, M. C., Leite, R. H., Santos, F. K., Oliveira, V. R., Araújo, N. O. and Silva, K. N. (2019). Physicochemical, antioxidants and sensorial properties of Melipona subnitida honey after dehumidifying. Journal of Food Processing and Technology, 10(3), e1000781.

Bogdanov, S., Martin, P. and Lullmann, C.(2002). Harmonised methods of the International Honey Commission. Swiss Bee Research Centre, FAM, Liebefeld.

Carroll, T. (2006). A beginner’s guide to beekeeping in Kenya. Baraka Agricultural Training College: Nakuru, Kenya.

Carroll, T. and Kinsella, J. (2013). Livelihood improvement and smallholder beekeeping in Kenya: the unrealised potential. Development in Practice, 23(3), 332-345.

Codex, A. C., Commission, J. F. W. C. A. and Programme, J. F. W. F. S. (2001). Codex Alimentarius Commission (Vol. 9): Bernan Assoc.

Crittenden, A. N. (2011). The importance of honey consumption in human evolution. Food and Foodways, 19(4), 257-273 Gomes, T., Feás, X., Iglesias, A. and Estevinho, L. M. (2011). Study of organic honey from the northeast of Portugal. Molecules, 16(7), 5374- 5386.

Ishaq, R., Azmat, H., Omair, M., Sheikh, A. K. and Tanwani, A. K. (2018). Comparison of honey with alcohol as a fixative in fine needle aspiration cytology. International Journal of Pathology, 15-18.

Kenya Standards, E. A. S. (2020). Honey Specification. Nairobi: Kenya Bureau of Standards (KEBS).

Manyi-Loh, C. E., Clarke, A. M. and Ndip, N. (2011). An overview of honey: Therapeutic properties and contribution in nutrition and human health. African Journal of Microbiology Research, 5(8), 844-852

Mesbahi, M. A., Ouahrani, M. R., Rebiai, A., Amara, D. G. and Chouikh, A. (2019). Characterization of Zygophyllum album L Monofloral Honey from El-Oued, Algeria. Current Nutrition & Food Science, 15(5), 476-483.

Nzula, M. C. (2018). Evaluation of Apiculture in the context of food security and environmental management in Kathonzweni Division, Makueni County, Kenya.

Robert, B. M. (2010). Characterization of Kenyan Honey and a Design Model for Processing Equipment. Doctor of Philosophy in the School of Pure and Applied Sciences, Kenyatta University, Nairobi.

Silva, T. M., dos Santos, F. P., Evangelista- Rodrigues, A., da Silva, E. S., da Silva, G. S., de Novais, J. S. and Camara, C. A. (2013). Phenolic compounds, melissopalynological, physicochemical analysis and antioxidant activity of jandaíra (Melipona subnitida) honey. Journal of Food Composition and analysis, 29(1), 10-18.

Vallianou, N. G., Gounari, P., Skourtis, A., Panagos, J. and Kazazis, C. (2014). Honey and its anti-inflammatory, anti-bacterial and anti-oxidant properties. Gen Med (Los Angel), 2(132), 1-5.

Warui, M. W., Hansted, L., Gikungu, M., Mburu, J., Kironchi, G. and Bosselmann, A. S. (2019). Characterization of Kenyan honeys based on their physicochemical properties, botanical and geographical origin. International journal of food science, 2019.

Yanniotis, S., Skaltsi, S. and Karaburnioti, S. (2006). Effect of moisture content on the viscosity of honey at different temperatures. Journal of Food Engineering, 72(4), 372-377

Downloads

Published

2021-08-27

How to Cite

Chepkemoi, M., Kollongei, J. ., & Some, D. . (2021). Characterization of Honey from Marigat in Baringo County, Kenya, based on their Physical Properties. Africa Environmental Review Journal, 4(2), Pg 227–233. https://doi.org/10.2200/aerj.v4i2.146